Vantablack VBx 2 was created for large scale spray application in areas such as architecture, ceiling blackouts, controlled lighting environments and other places where designers wish to create unique visual spaces, or control reflected light in ways that have previously been impossible on a large scale.
At 1% total hemispherical reflectance (THR), the coating’s performance in the visible spectrum allows designers to create unique optical spaces that maintain performance across a very wide viewing angle, so it’s more than capable of producing the infinite depth and void like forms where the viewer’s dimensional perception is constantly challenged. It also offers exceptional performance in stray light control in industrial lighting, optical sensing and automotive systems.
The Vantablack VBx 2 absorber coating is a solvent based, pigmented coating dispersed in carrier solution. It has no harmful constituents. Once sprayed, it leaves behind a structured light absorbing layer. It should not be used in areas subject to direct contact or abrasion.
Please note that VBx 2 is not available in a spray can or for private consumer purchase and application. Currently it is classed as dual-use by the UK Government, so an export licence may be required under some circumstances.
Please review FAQ's on Vantablack VBx 2 to see if it might be suitable for your application.
THR (total hemispherical reflectance) 1% at 600 nm (visible spectrum)
Shock and vibration resistance to > MIL-810G
Thermal shock and cycling from -196 to +70°C
Water resistant – not suitable for external use
High performance at extreme viewing angles >70° (TIS – 1.8% at 70° VIS)
Application temperature ~20°C
Architectural coatings used internally
Architectural lighting overspill control
Optical stray light suppression in lens systems
Vantablack VBx 2 is applied using airless spray guns in the same way a conventional paint is sprayed. It can only be deposited by trained paint contractors as the application process is more complex than for conventional paints.
Typical substrates that VBx 2 can be applied to are as follows:
Some porous substrates will require sealing prior to application of the coating.
Samples of Vantablack VBx 2 on aluminium substrates are available on request, please contact us.